Basement Waterproofing - Interior
Interior Waterproofing and Sump Pump Installation in Hamilton
Key Challenges
- Hydrostatic pressure forcing water through the perimeter joint
- Blocked interior drain tiles
- Outdated pedestal pump with inconsistent start/stop cycles
Scope of Work
- Interior perimeter trench and drainage channel
- New sump pit at the lowest point of the slab
- Submersible sump pump with float switch + battery backup
- Wall membrane along lower courses to guide moisture to the channel
- Polyurethane seal at the floor–wall joint
- New discharge line routed well away from the foundation
- Concrete restoration and clean finish
Step-by-Step
- Assessment & Prep — Removed baseboards, scanned the perimeter, and marked low points. Cut a neat trench along interior walls to expose the footing and remove clogged tiles.
- Drainage Channel — Laid a sloped perforated pipe wrapped in non-woven filter fabric, surrounded with clean gravel for free flow to the pit.
- Sump System — Installed a submersible pump with an automatic float switch and check valve. Added a battery backup for storm-related outages common in Hamilton.
- Wall Protection — Applied a durable membrane to the lower wall area to direct any seepage into the channel; sealed the joint with flexible polyurethane.
- Finish — Restored the trench with fresh concrete and tidied the workspace for a ready-to-use area.
Results
A controlled water test confirmed rapid collection and discharge with no seepage along walls or joints. Humidity dropped, odours cleared, and the homeowner regained full use of the basement—ready for storage, a home gym, or future finishing.
Project Details
Location: Hamilton, ON
Service: Interior waterproofing + sump pump install
Duration: 2 days (including curing and finish work)
Outcome: Dry, odour-free basement and dependable drainage path
Get Started with 10% Off Today!
Unparalleled quality service, 25 years warranty, all available today with 10% off.




